Whether you are managing a small or large plant, make sure that your turbo blower is in great condition. This simple device is responsible for making sure that all of the processes and systems are working properly. However, some people just forget about this piece of equipment until they have a serious problem to deal with. As a result, they have to spend a lot of time and money to get the unit repaired. Therefore, before you wait for the unit to face a failure, we suggest that you follow the proper maintenance schedule. Given below are some of the tips can that can help you do just that.
Check the Oil Levels
First of all, you may want to make it a habit to check the oil levels on a regular basis. Running the unit low on oil levels is a big mistake as this can cause the unit to fail. What happens is that when the oil levels are low, the rotor lobs tend to clash. As a result, they have to be replaced, which may cost quite a bit of money.
It won’t take more than a few minutes to check the oil level and top it up. So, this is a simple process that you may want to follow.
Change the Lubricant
Another important tip is to make sure the lubricant inside the unit is not dirty. If there’s a lot of dust and dirt, the gears and bearings may get damaged. And you know that these components are not cheap to buy. You may have to spend plenty of money to get them repaired or replaced.
If you want to be on the safe side, you may want to change the lubricant as soon as it gets dirty. Not replacing the lubricants is a serious mistake that may cost you a lot of money. So, you want to make a note of the date you replaced the lubricant. This will serve as a reminder to help you change oils in a timely fashion.
Clean the Inlet Filter
You may also want to keep an eye on the inlet filter. The idea is to make sure that the filter is not clogged. Any type of blockage may restrict the airflow, which may prevent the blower from maintaining the ideal temperature. If this happens, it will cause a lot of wear and tear to the plate. In some cases, it will result in a failure.
So, it is important to monitor the entire inlet filter on a regular basis and get it cleaned or replaced. Again, this will not cost you a lot of time or money but can save you a lot of headaches down the road.
Prevent Over-Pressure
If you want to prevent overpressure, you can install a pressure relief valve. Once you have installed one, make sure you check it on a regular basis to make sure proper operation. Apart from this, you can fix a discharge pressure switch as well.
In short, you may want to follow these simple tips if you want to take care of your turbo blower so that it stands the test of time.